Can we borrow your eyes??? (to find a stolen Blazer)?

My friend's silver, 4-dr., 2001 BlazerLT (w/sliding sun roof, luggage rack, a scratch resembling a sideways 6 on the rt. side of the rear door, and a trailer hitch. The 4-pin wiring connector is rather long; and, may still be wrapped around the hitch.) was stolen on 08/08, by a fellow who was supposively helping him fix his place up to rent (so, my friend wouldn't lose his home of 25 years.) We knew this guy by the name "Mike Kaylen;" but, that was an alias. I have a photo of him at: http://www.okplus.com/fedup/blazer/mike01.jpg He has been known to support himself by recycling scrap, welding, landscaping, etc. He also has ties to (so.)CA, TX, SC, KY, NH, and ?? If he hasn't switched plates, the tag # is IL, 111-9405; but, he may have swapped plates. If anyone sees him; or, a Blazer fitting this description; please contact your local police; and, tell them the Woodridge (IL) PD has a stolen report on it (#06-11367.) Det. Valenta is the case officer. PLEASE HELP!!!!!

Unfortunately, if the vehicle is not recovered within the first few days, chances are it has been chopped, or resold with a replacement VIN tag.

trailer hitch racks for Sale on Ebay

trailer hitch racks for Sale on Amazon

Select The Right Trailer In The Market And Make Your Road Journey Easier

Trailer hitch was invented for convenience sake when transporting whatever you could hook on it and it is a fact.  However, you must agree that these trailer hitches could even give you struggles while on the road.

Trailer hitch isn't destined to be a "rocket science" and because it is widely used, you could find them almost anywhere.  Though, simply getting a hitch of your own is not enough, its important that you know the factors to consider while choosing the right one.

Let's get to know the regional variations of trailer hitch.  Hitches are recognized based on their load capacity and design directed by road requirements such as:

Trailer Hitch Classification: Fixed-drawbar type and the receiver type are the most common and accepted types.  Fixed-drawbar type is usually built as 1 piece and often compatible with several hitch accessories.

Designed to operate with the trailer ball accommodated by the integrated hole. This method is sub-classified based on their duty capacity from class I to IV by the SAE International.

Class I can take up to 910 kg or 2000 lbs
Class II can take up to 1600 kg or 3500 lbs
Class III can take up to 2300 kg or 5000 lbs
Class IV can take up to 4500 kg or 10000 lbs

Receiver type is designed with a square opening as a receiver.  For Class I and II the size of the receiver opening is 1.25 inches, Class III and IV has 2 inches.  Portion of it is mounted to the vehicle frame.  It has an opening facing toward the back which gets certain hitch mounted load, cargo carriers; hitch bike racks, and mounts that are removable.

This type functions through a trailer coupling that slips over tow-ball.  Tow-ball comes in numerous sizes based on their carrying capacity.  

Making the Hitch Work: Its always easier to connect hitches while working with an acquaintance to help which keep things simple.  While the first person would be navigating the vehicle for the positioning, the second person would guide the hitch into its perfect place.  

Points to Remember: The tongue latch on the trailer must be open; however, the tongue should be placed over the hitch ball of the vehicle if it has a hand jack.

Adjust the vehicle just below the trailer tongue.

Release the hand jack slowly to remove all the weight, once the tongue is positioned.
Remember to always secure the tongue latch and attach the safety chains.

Connect the supplied wiring harness with the trailer wiring in order to have the break lights, parking lights, and turn signals work.

It is best to choose for a hitch that has 2 safety methods like lynch pin which holds the connecting pin might not be enough for the load.  Ideally, hitches that have bushing can keep the irritating noise away since lubes and grease will fade away after a short time with all the stress it would absorb along the way.

When choosing for the right trailer hitch which will serve you best, its essential that you determine the size of the load you would like to move from time to time.  Based on the trailer hitch classification, you may refer to the manufacturers or dealers who are the experts to check and determine which trailer hitch type you should pick.

About the Author

To find a revolutionary product in the field of trailer hitch that produces strength in design, simplicity in coupling, and fluidity in motion, go to http://www.ozhitch.com

trailer hitch racks Video

Thule 997 GoalPost Hitch Rack Review Video by ORS Racks Direct

Thank you for reading trailer hitch racks, we hope it gives you more information about trailer hitch racks.

Tags: racks, trailer hitch racks, hitch